CONTACT TED JECZALIK, P.O. BOX 763, ELFERS, FL 34680, USA orders@biznet1.com PAYPAL

DUAL OIL BYPASS FILTERS SAVE YOU MONEY!
Average oil change & lube for semi truck in 2008 is about $220.00 + and going up . Your investment is paid off in less then 6 months. You can save thousands of $dollars in just one year of dual bypass oil filters.
Dual-Gard By-Pass Oil Filtration System - Still Loosing$200.00+ / Month on Oil Changes!

Bypass Filter System - BMK-12 for Semi Trucks HOW IT WORKS:

Heavy duty diesel engines  Bypass Filter System - BMK-12 For large truck, stationary engines, compressors, forestry, agriculture, marine, mining. AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (BETA 75) at TWO microns. The AMSOIL Dual-Gard By-Pass Oil Filtration System treats oil to ultrafine filtration, which increases engine and oil life and enhances engine performance for heavy duty diesel engines.Wear tests have shown particles of contamination in the sub-20-micron range are most harmful to rings and bearings. These filters remove 39% of soot contaminants less than one micron, and are considered SRD's (soot removal devices). Dual-Gard Mount Links two AMSOIL By-Pass Filter Elements together for engines with sump capacities greater than 20 quarts. Includes Flow Restrictor without hardware, hoses or filter elements - 2 required. For use with EaBP-90, EaBP-100 or EaBP-110 Element. BMK12 (1) Dual Gard Mount -  INSTALLATION AND SERVISING More information  2 filters  EaBP-110's (2) EaBP-110's    To get most of your by pass filter - you need to switch to synthetic oil. The process is easy. If you do not have major leaks, synthetic oil lasts much longer, keeps engine cooler. 1 - Use oil flus and run engine with your regular oil for 15min. at higher RPM. 2 - change all filters and oil for synthetic AMSOIL. 3 - Monitor your oil by testing your oil - it will tell you when to change your oil.  BUY SYNTHETIC OIL ->

Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.

Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.

Soot Removal
AMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. These filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.

By-Pass Filtration Benefits

• Dramatically Extended Drain Intervals
  • Improved Oil Cooling
    • Increased Filtration Capacity and Life
       • Increased Fluid System Capacity
         • Efficient Small Particle and Soot Removal
            • Significantly Extended Engine Life
               • Equipment Constantly Runs on Clean Oil
                 • Increased Engine Efficiency
                    • Remove Particles Less Than One Micro

Dual Remote Filter System
The AMSOIL Dual Remote Oil Filtration System converts an engine’s full-flow oil filter system into
a full-flow/by-pass oil filtration system by attaching an AMSOIL Full-Flow Oil Filter and AMSOIL
Spin-On By-Pass Oil Filter onto a remote mount. The Dual Remote System provides superior filtration efficiency, increased oil capacity and improved oil filtration accessibility. See the G1092 brochure for more info on the Dual Remote Filtration System.

Filtration Kit	Application	Suggested Filter Elements	Optional Components	Description	Orders PAYPAL
DUAL SPIN-ON BYBASS FILTER BMK-12 Filter Replacement is below	Large trucks, Semi Trucks, OTR Trucks stationary engines, compressors, forestry, agriculture, marine, mining	(2) EaBP-90 or (2) EaBP-100 or (2) EaBP-110	All hoses and fittings	Dual mount only, does not include filters, hose or fittings. Crankcase capacity / suggested filters - 15 to 18 qt. = (2) EaBP-90, 18 to 30 qt .= (2) EaBP-100, 30 to 42 qt. = (2) EaBP-110	$340.00
Filter Replacement EaBP-110's DUAL SPIN-ON ELEMENT (Used with BMK-12 DUAL-GUARD)	Large Trucks, Construction, Farm and Industrial Equipment (minimum sump capacity = 15 qt.)			Diam. = 5 in. Height = 10.4 in. With Mnt. = 12 in Extra oil req. - 4 qt.	(2) EaBP-110's $85.00
BMK-11	Auto/Light Truck and  Marine (Dodge w/Cummins 2004 and later)	EaBP-90, 100 and 110	BP-44, 45, 67  and 89	Add-on by-pass filter kit. Includes mount, hose and fittings. Order filter separately.	$281.00
SINGLE SPIN-ON ELEMENT (Used with BMK-11 or any DUAL REMOTE SYSTEM)	Pleasure Vehicles, Light Trucks and Smaller Commercial Applications			Diam. = 4.5 in. Height = 6 in. With Mnt. = 8 in.	EaBP-110 $44.00
BMK-13	Auto/Light Truck Marine	EaBP-90, 100 and 110 EaO-10, 34, 42, 96, 15* or 26*	BK-11, 12 and 13	Relocate full-flow with by-pass filter. Includes mount, hose and fittings. Order filters separately.	$253.00 Dual
BMK-14 Remote Full-Flow Mount Kit Without filter element - 1 full-flow required. BMK14 (1) Remote Full-Flow Mount 6.0	Auto/Light Truck	EaO-96, 15 or 26	BK-11 and 12	Relocates full-flow filter only.	$240.00
BMK-15Ea	Light truck primarily Dodge with Cummins engines 2003 and older	EaBP-100 and EaO-26	BK-11, 12 and 13	Relocate full-flow with bypass for 5.7 and 5.9 liter Cummins engines. Includes mount, filters, hose and fittings.	$283.00
BMK-16Ea	Light truck primarily Ford with International engines	EaBP-100 and EaO-26	BK-11, 12 and 13	Relocate full-flow with by-pass for 6.9, 7.3 and 7.5 liter International engine. Includes mount, filters, hose and fittings.	$293.00
BMK-17Ea	Light truck primarily GMC with Isuzu engines	EaBP-100 and EaO-26	BK-11, 12 and 13	Relocate full-flow with by-pass for 6.6 liter Isuzu diesel engine. Includes mount, filters, hose and fittings.	$283.00
BMK-18 CHECK ALL DETAILS	BMK-18 to be installed on a wide variety of recreational and light commercial marine engines.			Marine Dual Remote Filtration System (BMK-18) The BMK-18 is packaged in kit form, which includes the Dual filter mount, mounting hardware, hoses, hose fittings, component parts and installation instructions. In addition, adapter kits of four different sizes enable the BMK-18 to be installed on a wide variety of recreational and light commercial marine engines.	BMK-18 $499.00 BMK-18 Adapters BK195 (1) 3/4 x 16” Thread Adapter 0.1  $49.00 BK196 (1) 13/16 x 16” Thread Adapter 0.1  $49.00 BK197 (1) 18mm x 1.5” Thread Adapter 0.1  $49.00 BK198 (1) 20mm x 1.5” Thread Adapter 0.1  $49.00
DETAILS	The AMS-Oiler® operates as an engine oil reservoir, charged under pressure directly from the oil pump output during normal engine operation. Upon turning the ignition key to the on position, up to 160 cc’s (5.4 oz.) of oil are discharged from the reservoir to engine surfaces, building oil pressure and providing vital lubrication.			AMS-Oiler™ Oil Precharger The AMS-Oiler® is a high-tech oil pre-charger that puts an end to potential dry-engine starting. Typically, an engine that has sat for even a short period of time will operate relatively dry upon starting before oil is able to fully lubricate the system.	$399.00 - AMK-01 Designed for use with the AMSOIL BMK-13 or 15 through 18 Dual Remote Systems. AMK01 (1) By-Pass Pre-Charger 4.3 AMK-02 - $454.00 Can be used with any engine application and mounts at any angle. AMK02 (1) Stand Alone Pre-Charger 6.2
	EaBP = By-pass filter element EaO = Full flow filter element
	Always use a full flow filter that is as large or larger than the current oil filter on the engine.
	*Most commonly used full flow filters

	Typical Installation Diagram for BMK-13, BMK-15Ea, BMK-16Ea and BMK-17Ea Kits. Click on diagram for larger image (Opens a new browser window) See the By-Pass Replacement Parts Lists
BMK-13 Installation and Servicing Instructions  BMK-14 Installation and Servicing Instructions  BMK-15Ea Installation and Servicing Instructions  BMK-16Ea Installation and Servicing Instructions  BMK-17Ea Installation and Servicing Instructions  BMK-18 Installation and Servicing Instructions  Filtration Systems Application Guide

AMSOIL By-Pass Filter Replacement Chart
Type of Unit	Stock Number	Size (Approx.)	Additional Oil Needed	Crankcase Capacity	Applications
SINGLE SPIN-ON ELEMENT (Used with BMK-11 or any DUAL REMOTE SYSTEM)	EaBP-90 $38.00	Diam. = 4.5 in. Height = 6 in. With Mnt. = 8 in.	1 qt.	up to 9 qt.	Pleasure Vehicles, Light Trucks and Smaller Commercial Applications
	EaBP-100 $39.00	Diam. = 4.5 in. Height = 8 in. With Mnt. = 10 in.	1.5 qt.	up to 15 qt.
	EaBP-110 $44.00	Diam. = 4.5 in. Height = 10 in. With Mnt. = 12 in.	2 qt.	up to 21 qt.
DUAL SPIN-ON ELEMENT (Used with BMK-12 DUAL-GUARD)	(2) EaBP-90's $74.00	Diam. = 5 in. Height = 5.8 in. With Mnt. = 8 in.	2 qt.	15 to 18 qt.	Large Trucks, Construction, Farm and Industrial Equipment (minimum sump capacity = 15 qt.)
	(2) EaBP-100's $75.00	Diam. = 5 in. Height = 7.3 in. With Mnt. = 10 in.	3 qt.	15 to 30 qt.
	(2) EaBP-110's $85.00	Diam. = 5 in. Height = 10.4 in. With Mnt. = 12 in.	4 qt.	15 to 42 qt.
Normal Service Life b:When used in conjunction with AMSOIL motor oil and an EaO or Donaldson Endurance filter, the EaBP should be changed every other full flow filter change up to 60,000 miles. When used with other brands of motor oil or full flow filters, the EaBP filter should be changed every other full flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

a. Filters can be used on sumps of larger capacity but then require more frequent replacement.  Full details on service life included with filter installation instructions

b. Data determined in a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor Oil and AMSOIL Full-Flow Oil Filter.  Service life varies in other engines (turbo and diesel) and with other oils and filters.

NOTES:

1. Special adapters and hardware may be required for some installations. A universal mounting bracket is included with the kit, however, custom brackets may be required depending on your vehicle's equipment options or personal preferences in mounting locations."

2. Contact AMSOIL INC. Technical Service for instructions before installing on vehicles with cast aluminum oil pans.

Spin-On By-Pass Filters  AMSOIL Spin-On By-Pass Filters offer the ultimate in filtration technology. Engine wear is caused by dirt particles larger than 5 microns. The AMSOIL By-Pass Oil Filter removes particles less than 1 micron, virtually eliminating engine wear. AMSOIL By-Pass Oil Filters filter all the oil in a six-quart system in about five minutes at an average engine speed equivalent to 45 mph. Product Code: BMK-11 BMK-11 Installation and Servicing Instructions

Typical Installation Diagram for  BMK-13, BMK-15Ea, BMK-16Ea and BMK-17Ea Kits.

Dual Remote Oil Filtration System (shown with optional AMS-Oiler Oil Precharger)   AMSOIL EaBP Bypass Filters have an efficiency of 98.7 percent (BETA 75) at TWO microns. The AMSOIL By-Pass Oil Filter provides the best possible filtration protection against wear, oil degradation, rust and corrosion. Working in conjunction with the AMSOIL EaO Absolute Efficiency Oil Filter, the AMSOIL EaBP By-Pass Filter operates by filtering oil on a "partial-flow" basis. It draws approximately ten percent of the oil at any one time and traps the extremely small, wear-causing contaminants and water that full-flow filters can't remove. The AMSOIL By-Pass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.  Product Code: BMK13 BMK - 13 Installation and Servicing Instruction

Series 2000 0W-30 100% Synthetic Oil,  Series 2000 20W-50 100% Synthetic Oil XL-7500 100% Synthetic 5W-30 XL-7500 100% Synthetic 10W-30 XL-7500 NEW 100% Synthetic 5W-20 XL-7500 100% Synthetic 10W-40  5W-30 100% Synthetic Oil 10W-30 100% Synthetic Oil

ORDER ON LINE

10W-40 High Performance 100%Synthetic Oil 20W-50 High Performance 100% Synthetic Oil 60W Super Heavy Weight Synthetic Racing Oil  10W-40 Semi-Synthetic Motor Oil  NEW Formula 4-Stroke 0W-40 Synthetic Motor Oil  NEW 20W-50 100% Synthetic Motorcycle Oil NEW 10W-40 100% Synthetic Motorcycle Oil